APEM 4700 - 4800 Push Button

4700-4800 Series Push Button

Momentary or alternate action push button switches. Single pole and double pole configurations are available with solder lug, quick connect or straight PC terminals.

MAIN FEATURES

  • Panel cut-out : Ø 12,2 (.480)
  • Butt action contacts
  • Button returns in upper position after actuation
  • UL, CSA and VDE (EN 61058-1) approved
  • Several actuator colours

View all PCB mounting push buttons here.

 

Quote

Description

The APEM 4700-4800 series momentary or alternate action push button switch. Single pole and double pole configurations are available with solder lug, quick connect or straight PC terminals. 

MAIN FEATURES

  • Panel cut-out : Ø 12,2 (.480)
  • Butt action contacts
  • Button returns in upper position after actuation
  • UL, CSA and VDE (EN 61058-1) approved
  • Several actuator colours

View all APEM products here.

Follow us on Facebook

• Torque : 0.95 Nm (.70 Ft.lb) max. applied to nut
• Panel thickness : 5 mm (.196) max. between 2 nuts
• Total travel : 4.5 mm (.177) +/- 0.5 (.019)
• Hand soldering : 270 °C max. for 10 seconds max. - Iron Ø 3 mm (.118)

ENVIRONMENTAL SPECIFICATIONS
• Operating temperature : -20 °C to +65 °C

MATERIALS
• Case : melamine-phenolic
• Plunger : polyamide
• Bushing : polyamide
• Contacts : A : silver
C : copper, silver plated

• Max. current/voltage rating with resistive load :
- silver contacts (A) : 3 A 250 VAC - 6 A 125 VAC
- copper contacts (C) : 2 A 250 VAC - 4 A 125 VAC
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength :
2,000 Vrms 50 Hz min. between terminals
3,000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10,000 cycles at full load

Related Products