FM Series Rocker

Single pole rocker switches, illuminated or non-illuminated with solder lug, quick connect or PC terminals. Rated up to 10 amps. Numerous actuator colours.

Please be advised that the FM series will be obsolete by February 2022. The ideal replacement is the FNR Rocker switch.

MAIN FEATURES :

  • For class II appliances.
  • VDE and UL approved.
  • Protection against moisture by double-shell case: When the switch is submitted to moisture (drops, condensation), the double-shell case conducts the liquid outside, thus protecting the contact area and terminals. The light dripping inside the equipment resulting from this should be evacuated by adequate arrangement on back of panel.
  • Protection by boot : In case of sand or splashing water, the best protection consists of insulating the rocker from these aggressive elements. This can be achieved with transparent PVC boot U5720. Order separately, see Sealing Boot section.

View all rocker switches here.

 

Description

The APEM FM series single pole rocker switches, illuminated or non-illuminated with solder lug, quick connect or PC terminals. Rated up to 10 amps. Numerous actuator colours.

Please be advised that the FM series will be obsolete by February 2022. The ideal replacement is the FNR Rocker switch.

MAIN FEATURES :

  • For class II appliances.
  • VDE and UL approved.
  • Protection against moisture by double-shell case: When the switch is submitted to moisture (drops, condensation), the double-shell case conducts the liquid outside, thus protecting the contact area and terminals. The light dripping inside the equipment resulting from this should be evacuated by adequate arrangement on back of panel.
  • Protection by boot : In case of sand or splashing water, the best protection consists of insulating the rocker from these aggressive elements. This can be achieved with transparent PVC boot U5720. Order separately, see Sealing Boot section.

View all APEM products here.

Follow us on Facebook

• Panel cut-out 19 x 13 (.750 x .508)

ENVIRONMENTAL SPECIFICATIONS
• Operating temperature : -20 °C to +85 °C

MATERIALS
• Case, frame, rocker : PA6/6
• Contacts : silver
• Terminals : silver plated

• Approved ratings (functions 1 and 6 ) :
VDE : 10(4) A 250 VAC T85 °C - UL : 6 A 250 VAC & 125 VAC T65 °C
• Max. contact rating :
- functions 1 and 6 : see above.
- function 3 : 4 A 250 VAC
- functions 8 and 9 : 6 A 250 VAC
• Initial contact resistance : 20mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength :
- functions 1 and 6 : 2,500 Vrms between terminals
- functions 3, 8 and 9 : 1,500 Vrms between terminals
• Electrical life at full load : 10,000 cycles