APEM IM Push Button

IM Series Momentary Push Button

Harsh and noisy environments, including those involving vibrations make the use of a sealed switch with a positive, tactile “click” essential. The IM series with its strong and audible tactile feedback responds to those needs.

MAIN FEATURES

  • Snap-action mechanism: audible tactile feedback, high voltage rating.
  • Enhanced safety, resistance to shocks and vibrations
  • Light plastic case
  • 2 bezel diameters
  • Matches the I series range design
  • Ergonomically adapted for use in tight spaces (handles & vehicles)
  • IP67 frontal sealing
  • 1 million mechanical life cycle at low level current
  • NC+NO function.
  • Very reliable in harsh environments.

View all push buttons here.

 

Quote

Description

The APEM IM series momentary push button is used for harsh and noisy environments, including those involving vibrations. This makes the use of a sealed switch with a positive, tactile “click” essential. The IM series with its strong and audible tactile feedback responds to those needs.

MAIN FEATURES

  • Snap-action mechanism: audible tactile feedback, high voltage rating.
  • Enhanced safety, resistance to shocks and vibrations
  • Light plastic case
  • 2 bezel diameters
  • Matches the I series range design
  • Ergonomically adapted for use in tight spaces (handles & vehicles)
  • IP67 frontal sealing
  • 1 million mechanical life cycle at low level current
  • NC+NO function.
  • Very reliable in harsh environments.

View all APEM products here.

Follow us on Facebook

• Panel thickness: 1.5 mm (.059) to 10 mm (.394)
• Total travel: 1.7 mm (.067) +/- 0.3 mm
• Low level or mechanical life: 1,000,000 cycles
• Torque (applied to nut): 1 Nm max. with metal nut U166 - 1.5 Nm max. with plastic nut U4248

ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing: IP67 according to IEC 60529
• Shock resistance: 50 g - 11 ms according to IEC 68-2-27
• Salt spray: IEC 512-6, test 11f
• Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)
• Storage temperature: -40 °C to +8 5°C (-40 °F to 185 °F)

MATERIALS
• Case: polyamide 4/6
• Actuator: polyamide 6/6
• Bushing/bezel: polyamide 6/6
• Contacts: silver, gold plated
• Terminal seal: epoxy

• Max. current/voltage rating with resistive load: 3 A 28 VDC
• Initial contact resistance: 100 mΩ max.
• Insulation resistance: 1 GΩ min. at 500 VDC
• Dielectric strength: 500 Vrms between terminals
• Electrical life at full load: 25,000 cycles

Related Products