APEM IP Momentary Push Button

IP Series Momentary Push Button

APEM IP series is an illuminated or non-illuminated momentary action push buttons for harsh environments, sealed to IP67 and IP69K (non-illuminated models). Round or square actuator, available in many different colours. Numerous terminal options, gold-plated silver contacts.

They are Normally open (NO) or NC/NO combined (non-illuminated only). Variety of terminal options available. Flat round actuator for optional marking

High brightness illumination. Tin plated LED terminals. Operating temperature: -40 °C to +85 °C.

ADDITIONAL SEALING

  • For ROUND plungers only, illuminated or non-illuminated
  • By silicone boot for protection against frost and abrasion by sand. Order separately.
    • transparent: U5125
    • blue: U5125-1
    • black: U5125-2
    • red: U5125-6

NOTE: Latching version also available.

View all push buttons here.

 

Quote

Description

The APEM IP series lluminated or non-illuminated momentary action push buttons for harsh environments, sealed to IP67 and IP69K (non-illuminated models). Round or square actuator, available in many different colours. Numerous terminal options, gold-plated silver contacts.

MAIN FEATURES

  • Normally open (NO) or NC/NO combined (non-illuminated only)
  • Variety of terminal options
  • Flat round actuator for optional marking
  • High brightness illumination
  • Tin plated LED terminals
  • Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)

ADDITIONAL SEALING

  • For ROUND plungers only, illuminated or non-illuminated
  • By silicone boot for protection against frost and abrasion by sand. Order separately.
    • transparent: U5125
    • blue: U5125-1
    • black: U5125-2
    • red: U5125-6

NOTE: Latching version also available.

View all APEM products here.

Follow us on Facebook

• Panel thickness: 1.5 mm (.059) min. , 4 mm (.157 max.)
• Total travel:
Function 3: 1.7 mm (.067) +/- 0.3 mm
Function 5: 1.3 mm (.051) +/- 0.3 mm
• Typical operating force : 6N +/- 2N
• Low level/mechanical life: 1,000,000 cycles
• Torque: 1.5 Nm max. applied to nut
• Soldering: 320°C max. for 3 sec.

ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing: IP67 according to IEC 60529, IP69K according to DIN 40050-9 (non-illuminated) with cap U5125
• Shock resistance: 100 g according to IEC 512-4, test 6c
• Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Robustness (non-illuminated): IK06 according to EN 50102 (1 joule)
• Operating temperature: -40°C to +85°C
(-40°F to 185°F)

MATERIALS
• Case: thermoplastic UL94-V0
• Actuator: polyamide 6/6
• Bushing/bezel: zinc die-cast
(zamak), black painted
• Contacts: silver, gold plated (std)
brass, gold plated (for option 104)
• Output wires (flying lead terminals):
F version: AWG20, section 0.6 mm2
W version: AWG24, section 0.23 mm2
• LED wires:
F version: AWG26, section 0.12 mm2
W version: AWG24, section 0.23 mm2
• Lens: polycarbonate
• Terminal seal: epoxy

• Max. current/voltage rating with resistive load (gold plated silver contacts):
5A 28VDC, 70,000 cycles
0.2A 48VDC, 500,000 cycles
0.5A 48VAC, 500,000 cycles
• Initial contact resistance: 100 mΩ max.
• Insulation resistance: 1 GΩ min. at 500VDC
• Dielectric strength: 1,500 Vrms
• Contact bounce: 10 ms

Related Products