APEM IS Sealed Push Button

IS Series Sealed Push Button

Sealed push button switches with threaded bushing. Compact and light in weight with 50% reduction in weight compare to metallic models.

MAIN FEATURES

  • Behind panel depth of 13mm (.512)
  • Tactile feedback
  • Sealed to IP67
  • Illuminated or non-illuminated (for round plunger only)

Additional sealing by silicone boot for protection against frost and abrasion by sand.

View all push buttons here.

 

Quote

Description

The APEM IS series sealed push button switch with threaded bushing. Compact and light in weight with 50% reduction in weight compare to metallic models.

MAIN FEATURES

  • Behind panel depth of 13mm (.512)
  • Tactile feedback
  • Sealed to IP67
  • Illuminated or non-illuminated (for round plunger only)

Additional sealing by silicone boot for protection against frost and abrasion by sand.

View all APEM products here.

Follow us on Facebook

• Panel thickness: 1,5 mm (.059) min. - 4 mm (.157) max.
• Total travel: 1.7 mm (.066) +/- 0.3 mm
• Typical operating force: 4 N +/- 3 N
• Low level or mechanical life: 1,000,000 cycles
• Torque (applied to nut): 1 Nm max. with metal nut U166 1.5 Nm max. with plastic nut U4248
• Soldering: 300 °C max. for 3 seconds

ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing according to IEC 60529: IP67
• Shock resistance: 100 g according to IEC 512-4, test 6c
• Vibration resistance: 10-500 Hz - 10 g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)

MATERIALS
• Case: thermoplastic UL94-V0
• Actuator: polyamide 6/6
• Bushing/bezel: polyamide 6/6
• Contacts: silver, gold plated
• Terminal seal: epoxy

• Max. current/voltage rating with resistive load: 400 mA 32 VAC - 100 mA 48 VDC
• Initial contact resistance: 50 mΩ max.
• Insulation resistance: 1 GΩ min. at 500 VDC
• Dielectric strength: 1,000 Vrms
• Electrical life at full load: 500,000 cycles

Related Products