APEM IZ Plastic Latching Push Button

IZ Series Plastic Latching Push Button

The IZ series is a rear mounted push button, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.

MAIN FEATURES

  • Rear mounting for easier installation
  • Latching action models
  • Sealed to IP67
  • Illuminated or non-illuminated
  • Flat actuator for optional marking

View all push buttons here.

 

Quote

Description

The APEM IZ series plastic is a latching rear mounted push button, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.

MAIN FEATURES

  • Rear mounting for easier installation
  • Latching action models
  • Sealed to IP67
  • Illuminated or non-illuminated
  • Flat actuator for optional marking

View all APEM products here.

Follow us on Facebook

• Panel thickness: 3 mm (.118) max.
• Total travel: 2.5 mm (.098) +/- 0.3 mm
• Typical operating force: 5 N +/- 2 N
• Low level or mechanical life: 200,000 cycles
• Torque: 0.7 Nm max. applied to nut
• Soldering: 320 °C max. for 3 sec.

ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing: IP67 according to IEC 60529
• Shock resistance: 100 g according to IEC 512-4, test 6c
• Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)

MATERIALS
• Case: thermoplastic UL94-V0
• Plunger: polyamide
• Bushing/bezel: polyamide
• Contacts: silver, gold plated
• Multi-wire lead AWG20, section 0.6 mm2
• LED wire: AWG26, section 0.12 mm2
• Lens: polycarbonate
• Terminal seal: epoxy

• Max. current/voltage rating with resistive load: 100 mA 24 VDC - 200,000 cycles
• Initial contact resistance: 100 mΩ max.
• Insulation resistance: 1 GΩ min. at 500 VDC
• Dielectric strength: 1,500 Vrms between terminals

Related Products