APEM MT Rocker Switches

MT Series Rocker

The MT is an environmentally sealed rocker switch that is actuated with a rocking motion. Multiple single functions available. Various contact materials that allow usage from dry circuit applications up to 4A. This sealed rocker switch comes in a single pole double throw (SPDT switch) package and is available in two or three positions; momentary and maintained functions.

MAIN FEATURES

  • Environmentally sealed to IP68
  • Multiple single pole functions available
  • Various contact materials that allow for usage from dry circuit applications up to 6 A 125 VAC, 3 A 250 VAC.
  • Panel cut-out dia. 17.65 (.695)
  • Matte black (std) or bright chrome finish
  • Solder lug or straight PC terminals

View all rocker switches here.

 

Quote

Description

The APEM MT series is an environmentally sealed rocker switch that is actuated with a rocking motion. Multiple single functions available. Various contact materials that allow usage from dry circuit applications up to 4A. This MT Series rocker switch comes in a single pole double throw (SPDT switch) package and is available in two or three positions; momentary and maintained functions.

MAIN FEATURES

  • Environmentally sealed to IP68
  • Multiple single pole functions available
  • Various contact materials that allow for usage from dry circuit applications up to 6 A 125 VAC, 3 A 250 VAC.
  • Panel cut-out dia. 17.65 (.695)
  • Matte black (std) or bright chrome finish
  • Solder lug or straight PC terminals

View all APEM products here.

Follow us on Facebook

• Low level or mechanical life : 100,000 cycles
• Panel thickness : 11.5 mm (.452) max.

ENVIRONMENTAL SPECIFICATIONS
• Operating temperature : -40 °C to +85 °C

MATERIALS
• Actuator : 6/6 nylon soft touch: thermoplastic elastomer over 6/6 nylon
• Bushing : brass, chrome plated
• Contacts
A: silver
AD: silver, gold plated
CD: brass, gold plated
• Terminal seal : epoxy

• Max. current/voltage rating with resistive load
- Silver contacts (A): 4 A 30 VDC
- Gold plated silver contacts (AD): 4 A 30 VDC (gold plating withstands up to 100mA 30VDC)
- Gold plated brass contacts (CD): 0.4 VA 20 VAC or DC
• Minimal load:
- A contacts: 50 mA 10 VDC
- AD and CD contacts: 10 mA 50 mV - 10 µA 5 V
• Initial contact resistance: 10 mΩ max.
• Insulation resistance: 1,000 MΩ min. at 500 VDC
• Dielectric strength: 1,000 Vrms 50 Hz min. between terminals, 1,500 Vrms 50 Hz min. between terminals and frame
• Contact bounce : 2ms max.
• Electrical life at full load : 50,000 cycles

Related Products