SR Series Rocker

APEM SR series rocker switch panel and pc mount versions straight or right angle, single and double pole, silver or gold plated contacts. Numerous configurations and options available, including UL agency approval. Many actuator options.

The rocker switch is sealed : Secure assembly of the two case parts, internally sealed bushing, epoxy sealed terminals. Process compatible : Wave solderable, washable. Optional ESD protection

View all rocker switches here.

 

Description

The APEM SR series rocker switch has panel and pc mount versions: straight or right angle, single and double pole, silver or gold plated contacts. Numerous configurations and options available, including UL agency approval. Many actuator options.

MAIN FEATURES

  • Sealed : Secure assembly of the two case parts, internally sealed bushing, epoxy sealed terminals
  • Process compatible : Wave solderable, washable
  • Optional ESD protection

View all APEM products here.

Follow us on Facebook

• Mechanical strength : Terminals are strengthened by a bracket or a ground plate insuring the rigidity of the switch on the board. Actuator strength is 10 N max.
• Soldering - thermal shock (S series only) : The switches are especially designed for flow soldering at 260 °C during 5 seconds owing to high temperature polymer parts.
• Iron soldering (SR series) : 300 °C 5 sec. max.
• Solderability : The switches are tested at 235 °C according to IEC 68-2-20 after accelerated aging.

ENVIRONMENTAL SPECIFICATIONS
• Operating temperature : -20 °C to +85 °C
• Storage temperature : -40 °C to +85 °C
• Moisture : The insulating materials employed and the complete seal permit the switches
to withstand a 56 days moisture test (IEC 68-2-3).

MATERIALS
• Case and cover : UL94-V0, polyamide, glass filled or PES
• Actuator : polyamide
• Contacts
CD or 0 : brass, gold plated
A or 1 : silver
AD or 2 : silver, gold plated
• Terminal seal : epoxy

• Max. current/voltage rating with resistive load :
- silver contacts (A or 1) : 4 A 30 VDC
- brass, gold plated contacts (CD or 0) : 0.4 VA 20 VAC or DC
- silver, gold plated contacts (AD or 2) : 4 A 30 VDC
(300 mA 30 VDC for gold plating)
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1,000 MΩ min.
• Dielectric strength : 1,000 Vrms 50 Hz min.