ความเป็นเลิศด้านวิศวกรรม
The IC series is a range of momentary push button switches for harsh environments with short case for reduced behind-panel depth. Easier integration even in the tightest spaces.
MAIN FEATURES
View all push buttons here.
The APEM IC series is a of momentary push button switch for harsh environments with short case for reduced behind-panel depth. Easier integration even in the tightest spaces.
View all APEM products here.
Follow us on Facebook
• Panel thickness: 1.5 mm (.059) min. 4 mm (.157 max.)
• Total travel: 1.7 mm (.067)+/- 0.3 mm
• Typical operating force: 4 N +/- 2 N
• Low level or mechanical life: 1,000,000 cycles
• Torque: 1,5 Nm max. applied to nut
• Soldering: 320 °C max. for 3 sec
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing: IP67 according to IEC 60529
• Shock resistance: 100 g according to IEC 512-4, test 6c
• Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Robustness: IK06 according to EN 50102 (1 joule)
• Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)
MATERIALS
• Case: thermoplastic UL94-V0
• Actuator: polyamide 6/6
• Bushing/bezel: zinc die-cast (zamak), black painted
• Contacts: silver, gold plated
• Multi-wire lead AWG20, section 0.6 mm2
• Terminal seal: epoxy
• Max. current/voltage rating with resistive load: 5 A 28 VDC, 70,000 cycles, 0.2 A 48 VDC, 500,000 cycles, 0.5 A 48 VAC, 500,000 cycles
• Initial contact resistance: 50 mΩ max.
• Insulation resistance: 1 GΩ min. at 500 VDC
• Dielectric strength: 1,500 Vrms 50 HZ between terminals
