Brands

view style:

MO 415 Inclination-Acceleration-Gyro Sensor
Makersan MO 415 Inclination-Acceleration-Gyro IAG Sensor designed for safety, control applications. They are sealed and reliable sensors covering a whole…

View Details
MO 420 Pressure Sensor
Makersan MO 420 Pressure Sensor designed for safety, control applications. They are sealed and reliable sensors covering a whole range…

View Details
MO 450 Rotary Position Sensor
Makersan MO 450 Rotary Position Sensor designed for safety, control applications. They are sealed and reliable sensors covering a whole…

View Details
MO 651 H3X Remote Keyless Entry
The Makersan MO 651 H3X Remote Keyless Entry is suitable for door latches, trunk lids and lift gates. Designed with…

View Details
MO 651 H4X Remote Keyless Entry
The Makersan MO 651 H4X Remote Keyless Entry is suitable for door latches, trunk lids and lift gates. Designed with…

View Details
MO 651 H5X Remote Keyless Entry
The Makersan MO 651 H5X Remote Keyless Entry is suitable for door latches, trunk lids and lift gates. Designed with…

View Details
Mode of supervisory relay for alarm outputs for ND30, ND30IoT meters
Function can be ordered with new meters as well as activated on the device which have been already installed on…

View Details
Motor Sirens
TER Signal Lamps: Motor Sirens features a powerful low frequency sound. It is designed to effectively alert large areas by…

View Details
Mounting Device KOSMOS – ACK100 Series
Mounting device on DIN rail, table, wall or vertical grid. Kit contains: A. Two special attachment clips. B. 4 screws…

View Details
Mounting Device KOSMOS – ACK101 Series
Mounting device on DIN rail, table, wall or vertical grid. Kit contains: A. Two special attachment clips. B. 4 screws…

View Details
Mounting Device on DIN Rail for KOS Series ACK103
Installation Kit on DIN RAIL for in-head converters. The kit ACK103 (KOS Converters) Includes: A. 1 M4 screws to secure…

View Details
Mounting Hardware
Mounting hardware for switches : knurled and hex nuts, locking rings, lockwashers, cap nuts, dress nuts, ground connectors and sealing…

View Details
MP Series Two-Step Push Button
APEM MP Series 2-step push button switches take remote control to a new level of safety. These push buttons are…

View Details
MP1 Displacement Joysticks
Joysticks are the most suitable hand controllers for dynamic applications such as remote vehicle operation and camera tracking systems, and…

View Details
MQTT protocol for ND30 meter
Protocol can be ordered with a new device as well as activated on the devices which have already been installed…

View Details
MRM60 Analog IMU
Gladiator Technologies MRM60 Analog IMU is a high Performance six-axis MEMS IMU with Analog output. Equipped with low noise sensors,…

View Details
MS Series Hall-Effect Industrial Joystick
The MS Series joystick is a contactless, Hall effect controller developed for demanding operator control applications that require a rugged,…

View Details
MS8221A Pocket size digital multimeter
Lumel MS8221A Portable Pocket size Digital Multimeter is equipped with a large, easy to read LCD display.

View Details
MSG Switch Guard for 12000 – 3500 – 600H – 6000
MSG Switch Guard for 12000 - 3500 - 600H - 6000 is a new range of switch guards combining modern…

View Details
MT Series Rocker
APEM MT series is an environmentally sealed rocker switch that is actuated with a rocking motion. Multiple single functions available.…

View Details
MT4 and MT6 Trackballs
Trackballs are ideal for applications that require the precise positioning of a cursor on a display screen. Daco trackballs are…

View Details
MU Series PCB Switches
The APEM MU Series PCB switches are a reliable solution for directional control in electronic devices. The MU series is…

View Details
Multi-colour RGB Warning Lights
TER Signal Lamps: Multi-colour RGB Warning Lights are high-quality and energy efficient indicators providing different colour options by mixing the…

View Details
Multi-pedal Footswitch
Herga has a wide range of multi-pedal footswitches with various contact configurations available on a selection of plastic and metal…

View Details
Multimec 3A
Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the…

View Details
Multimec 3C
Simplicity and reliability makes the Multimec 3C an excellent switch for build-in and over-mould solutions. In addition, the switch is…

View Details
Multimec 3E
Multimec 3E series switches have a hole in the switch body for mounting caps. This switch series is used for…

View Details
Multimec 3F
Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. It also…

View Details
Multimec 5E
Multimec 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body.…

View Details
Multimec 5G
Multimec 5G switch has a large diameter snap-on cap retention system and an actuator levelled with the switch body. The…

View Details
N Series Inclinometer
Small Inclinometers for measurement in the ranges of ±10, ±30 and ±70 degrees. The N2, N3 and N4 are capacitive,…

View Details
N100 Series Network Analyser
Lumel N100 Power Network Analyser with Central Measurement - 3-phase power network analyser with Ethernet and recording. The N100 it…

View Details
N14 Power network meter
Lumel N14 3-phase Power network meter is a programmable digital panel instrument designed for the measurement 3 or 4-wire power…

View Details
N19Z AC Digital Meter
N19Z meter measures AC voltage and current. The meter is designed to work in 3-phase networks (3- or 4-wire) or…

View Details
N20 Digital Panel Meter
The N20 meter is a digital programmable panel instrument designed for measurements of DC voltages, DC currents or temperature. The…

View Details
N20HPLUS Digital panel meter with RS485
The N20HPLUS meter is a digital programmable panel instrument designed for measurement of DC voltages up to 400V. The readout…

View Details
N20PLUS Digital Panel Meter with RS485
The N20PLUS meter is a digital programmable panel instrument designed for measurements of DC voltages, DC currents or temperature. The…

View Details
N20Z Digital Panel Meter
The N20Z meter is a digital programmable panel instrument designed for measurements of AC voltages, AC currents or frequency. The…

View Details
N20ZPLUS Digital Panel Meter with RS485
The N20ZPLUS meter is a digital programmable panel instrument designed for measurements of AC voltages, AC currents or frequency. The…

View Details
N21 Digital Panel Meter
N21 Digital meter is an ideal solution for visualisation of industrial processes. Universal input, universal supply and universal OLED display…

View Details
N24 Series Digital Panel Meters
Lumel N24 Programmable Digital Panel Meter series are designed for measurement of DC voltage or DC current, temperature from Pt100…

View Details
N27D Rail-mounted power network meter
Designed for measurement of RMS current and voltage (AC) active power and frequency. Thanks to modern design, N27D fulfills the…

View Details
N27P Rail-mounted power network meter
Designed for direct or indirect measurement of 1-phase network parameters: U, I, f, P, Q, S, PF, tg, fi, fi,…

View Details
N30O Digital Panel Meter
The N30O meter is designed for the measurement of pulses, frequency, rotational speed, period and worktime. The meter has 2…

View Details
N31U Digital Meters
Lumel N31U Digital Meter is a new programmable meter designed for the measurement of standard analog signals sed in automation.…

View Details
N32H Digital Meter
Lumel N32H Digital panel meter for DC Circuit Parameters. The N32H digital panel meter combines versatility, modern design and reliability.…

View Details
N32O Digital Meter
Lumel N32O is a programmable digital panel meter of pulses, frequency, rotational speed. The N32O digital panel meter combines versatility,…

View Details
N32P Power Network Meter
Lumel N32P Digital Panel Meter is a programmable meter for 1-phase power network parameters. It combines versatility, modern design and…

View Details
N32U Digital Meters
The Lumel N32U Programmable Digital Panel Meter designed for temperature, resistance and standard signals. The N32U meter combines versatility, modern…

View Details
N43 DIN Rail mounted 3-phase power network meter
Rail mounted 3-phase power network meter N43 For direct measurement (up to 63A) and indirect measurement of tri-phase systems with…

View Details

I already have an account here

Control Devices

Customer Service

ENJOY NIELSEN