N30P Power Network Meter

N30P meter is designed to measure: AC voltage, AC current, Active, reactive and apparent power cos φ, tg φ, φ, frequency, active, reactive and apparent energy, 15 min. active power, 10 min. voltage, 10 sec. frequency in single-phase power network.

 

Description

Lumel N30P Power Network Meter is designed to measure: AC voltage, AC current, Active, reactive and apparent power cos φ, tg φ, φ, frequency, active, reactive and apparent energy, 15 min. active power, 10 min. voltage, 10 sec. frequency in single-phase power network.

Features of the N30P Power Network Meter:

  • Three-colour display (14 mm high) in three intervals of the measured value
  • Meter programming from the keyboard or through the RS485 interface by means of the free delivered eCon program
  • Four alarm outputs with signalling by LED diodes operating in 6 different modes
  • Storage of minimal and maximal values for all measured quantities
  • Conversion of any measured value into a 0/4…20mA or 0…10V analogue signal
  • Storage of minimal and maximal values for all measured quantities
  • Firmware updating (options)

Lumel are the producers of automation devices for measurement, control, transmission and visualisation of various industrial processes. They also provide Services of designing and manufacturing of automation systems.

Since 1954 Lumel brand has been known as a producer of quality measuring devices and high-pressure die-casting all over the world. Their high position in the market has been achieved thanks to continuous development, employees and modern technology in areas of research, design and production. They deliver complex solutions for power and industrial automation sector as well as for automobile, chemical, steel, or HVAC industries

Their objective is to provide comprehensive solutions by designing intelligent systems based on the electronics Lumel manufactures, which are measuring and regulating equipment for industrial, automotive and military applications, as well as through service production of electronics.

View more Lumel products.

Follow us on Facebook

► Input:
● Current: 0...1 or 0...5A
● Voltage: 0...100V or 0 ... 400V

► Output: relay (4), Analogue (1), Energy pulse (1), Digital RS485/ModBUS (1)
► 3-colour display - red, green and orange programmable in three intervals of the measured value
● 14mm digit height
● Highlighted measuring units

► 4 alarm outputs with signalling by LED diodes, operating in 6 different modes
► Conversion of any measured value into a 0/4...20mA or 0...10V analogue signal
► Storage of minimal and maximal values for all measured quantities
► Meter programming from the keyboard or through the RS485 interface by means of free eCon software
Parameters which can be reprogrammed are as follows
● Display colour, individually in three intervals
● Thresholds of displayed overflows
● Display precision of the result (decimal point)
● Highlight of the unit
● Averaging time of the measurement
● Recounting of indications (individual characteristic)

► Supply: 85...253V AC/DC or 20...40V AC/DC
► Protection level from frontal side: IP65
► External dimension: 96 x 48 x 64mm