Please advised that this option is now obsolete as of September 2021. For further assistance please contact us.
Alpha Series
The ALPHA series is an advanced digital panel meter for the measurement and control of process variables, temperature, pulse input and load cells. A full complement of standard functions include ±32000 count display and set-point programming.
The Alpha series is available with the following inputs;
Process – Voltage, Current, Potentiometer, Ohmmeter, Volume Calculation & Logarithm Functions
Load Cell – +/- mV/V with Fail Safe, Sensor Break Detection, Linearisation & Rate of Change
Pulse Input – Tachometer, Chronometer, Batch Counter & Totaliser
DESCRIPTION
The model ALPHA-P 2.00 is a digital indicator for measurement and control of process variables with direct indication in engineering units. A full complement of standard functions include ±32000 count display, direct access to the set-points programming.
The programming software allows selection of:
• Sensor type, input level and sensor supply
• Two way scaling display
• Two type Filters with 10 levels each
• Round of display value
• 36 Programmable Logical functions
• Automatic Volume Calculation
• Fail Safe function on Set points
• 30 points linearisation
• Integrator and Totaliser with batch
• Programming Parameters Lockout
• Back to Factory Configuration
• 3 Tare Mode
• Blinking Display on alarm
• r.o.C. (rate of change) function
• Arc-Sine function
DATA SHEET
TECHNICAL MANUAL
The ALPHA-D model is a High Performance pulse input digital panel meter with two configurable inputs for connection to a wide variety of sensors and pulse generators.
Capable of making the functions of:
• COUNTER WITH MEMORY
• Batch counter, UP counter, DOWN counter and bi-directional (UP/DOWN) counter.
• CHRONOMETER / TIMER WITH MEMORY
• FREQUENCY METER / TACHOMETER
For measurement of frequency, RPM, speed, flow and time.
DATA SHEET
TECHNICAL MANUALS
Part 1 | Part 2 |
DESCRIPTION
The ALPHA-C model is an instrument designed to measure forces (weight, load, pressure, torque, etc). It admits connection to several bridge type transducers such as load-cells with low level signals up to ±300 mV and it provides an excitation voltage of 10 V or 5 V DC @ 120 mA that allows the connection up to 4 or 8 parallel load cells. A wide amount of functions that include the possibility of reading
up to ±32000 points, signal linearisation of up to 30 points, 36 programmable logical functions and direct access to the set-point values.
The programming menu allows the user to:
– Select input sensitivity
– Two display scaling methods
– Two filter types with 10 levels each
– Display value round.
– Programming parameters selective locking (code).
– Back to factory configuration
New from version C2.00
– 3 Tare mode
– Sensor break detection (any wire)
– Fail Safe independently programmable on each relays
– Function R.O.C. (Rate of Change)